Decoration Chocolate spray booths
Velvet spraying of desserts and yule logs, colouring moulds, finishing chocolate pieces: spray chocolate and cocoa butter without dirtying your workshop. The compact MINI SPRAY and the SP 12 extract and filter the spray mist.
- Cleanmist extracted and filtered
- 360°turntable
- Filterwashable, removable fan
Or call us: +33 (0)1 34 90 90 00
Spray booth
MINI SPRAY
The MINI SPRAY is a compact spray booth with extraction: it sits on a worktop so you can spray chocolate and cocoa butter without dirtying your workshop. Made entirely of stainless steel, it is very easy to clean: its filter is simply held by magnets, you just open the booth to reach it. Its fan, with adjustable power, extracts the spray mist, and its wide fold-down opening takes large pieces.
- 42 × 60cm footprint
- 42cm high
- 230V single-phase
- ExtractionFan with adjustable power
- FiltrationMagnetic filter, direct access
- Power supply230 V single-phase
- Dimensions420 × 600 × H 420 mm
Its strengths
Equipment
Watch the video
Request a quote
PDF brochure
Chocolate spray booth
SP 12
The SP 12 spray booth is a spraying cabinet for the workshop: it lets you spray chocolate and cocoa butter while keeping your workshop clean. Its fan extracts the spray mist through a heated filter area while the piece turns on its turntable. All stainless steel, it sits on a worktop or on its support stand on castors.
- 96 × 66cm footprint
- 0.55kW
- 400V three-phase
- ExtractionFiltering fan
- FiltrationHeated filter area, adjustable
- Power supply400 V three-phase · 0.55 kW
- Dimensions960 × 660 × H 1,100 mm
Its strengths
Equipment
Watch the video
Request a quote
PDF brochure
Three possible set-ups
Countertop, on a stand or as a SPRAY & MELT combo
Depending on the space you have, the booth sits on your worktop, on its stand on castors or on a warming cabinet.
Countertop booths
The SP 12 or the compact MINI SPRAY, to be placed on a worktop or a table in your workshop.
Standard · SP 12: 960 × 660 × H 1,100 mm · MINI SPRAY: 420 × 600 × H 420 mm
On a stand on castors
A stainless steel stand on castors, with storage, to work at the right height and move the booth around the workshop.
Optional · total height 2,060 mm
SPRAY & MELT combo
The spray booth is stacked on a Choketuve CK 120 warming cabinet. In the cabinet, just below, you keep your spray gun and spraying accessories warm.
Optional · recommended combo, saves space
SP 12
How does a spray booth work?
You spray inside the booth: the chocolate mist is drawn to the back and held by the filter, instead of settling in the workshop.
Turntable
1. Place the piece
Place the dessert, the mould or the chocolate piece on the turntable, under the interior lighting.
Fan
2. Spray
The fan extracts the mist through the heated filter area; the deflector box guides the air to the back.
Stainless steel
3. Clean
The fan can be electrically disconnected and removed for cleaning. The spray gun hangs on its hook.
Technical data
Specifications of the MINI SPRAY and SP 12 spray booths
| MINI SPRAY | SP 12 | |
|---|---|---|
| Length | 420 mm | 960 mm |
| Depth | 600 mm | 660 mm |
| Height | 420 mm | 1,100 mm |
| Height with support stand | — | 2,060 mm |
| Power | — | 0.55 kW |
| Voltage | 230 V single-phase | 400 V three-phase · 50 Hz |
| Extraction | Fan with adjustable power | Filtering fan, can be electrically disconnected |
| Filter area | Magnetic filter, direct access for cleaning | Heated, adjustable temperature |
| Equipment | Turntable, wide fold-down opening, all stainless steel construction | Turntable, interior lighting, hook for spray gun |
| Spray gun | Not supplied | Not supplied |
| Options | — | Support stand on castors · SPRAY & MELT combo with CK 120 warming cabinet |
How to choose: our guide to the professional chocolate tempering machine and to the professional chocolate enrober. Not sure? Try our interactive guide. To picture it, design your lab in 3D (free).
Frequently asked questions
Spray booth: your questions
Also called a spraying cabinet, it is used to spray chocolate or cocoa butter with a spray gun without dirtying the workshop: velvet effect on desserts and yule logs, colouring moulds, finishing chocolate pieces. The spray mist is extracted and filtered inside the booth.
A fan extracts the chocolate mist through a heated filter area with adjustable temperature. A deflector box guides the air to the back of the booth, so that overspray does not come back out.
No. The SP 12 booth comes with a hook to hang the spray gun, but the gun itself is not supplied: you use your own. It is not supplied with the MINI SPRAY either.
It is 960 mm long, 660 mm deep and 1,100 mm high. With the optional support stand on castors, the total height is 2,060 mm.
The SP 12 booth runs on 400 V three-phase (50 Hz), with a power of 0.55 kW. The MINI SPRAY runs on 230 V single-phase.
The filtering fan can be electrically disconnected and removed for cleaning. The inside of the booth is stainless steel. The stainless steel MINI SPRAY is even simpler: its filter is magnetic, you just open the booth to reach it and clean it.
It is a combo that stacks the SP 12 spray booth on a Choketuve CK 120 warming cabinet. The cabinet, placed below, is used to keep the spray gun and spraying accessories warm, and the whole unit takes up the space of a single piece of furniture in the workshop.
The SP 12 is a large booth (960 × 660 × 1,100 mm) running on 400 V three-phase, with a heated filter area, used on a table, on its wheeled stand or as a SPRAY & MELT combo. The MINI SPRAY is a compact booth (420 × 600 × 420 mm) that sits on a worktop and runs on 230 V single-phase: made entirely of stainless steel, it is very easy to clean thanks to its magnetic filter, its fan power is adjustable and its wide fold-down opening takes large pieces.
The MINI SPRAY is 420 mm wide, 600 mm deep and 420 mm high: it fits on a worktop.
Yes: despite its compact size, the MINI SPRAY has a wide fold-down opening that takes large pieces.
Yes, it runs on 230 V single-phase, the current of a standard socket.
If space is tight, choose the MINI SPRAY: compact (420 × 600 mm footprint), it sits on a worktop. If you have room for a large booth, the SP 12 offers a heated filter area and can be installed on its wheeled stand or as a SPRAY & MELT combo with a Choketuve CK 120.
Quick quote
Request your quote in 1 minute
Leave us your details: a Savy Hacos expert will get back to you to clarify your needs and send you an offer suited to your production.
- A quick reply to your request
- Machines with a 2-year warranty
- Delivery and installation included in mainland France
Prefer to call? +33 (0)1 34 90 90 00
A project? Let’s talk about your production.
Spraying, decoration, finishing: our experts advise you on the equipment suited to your workshop.
Or call us: +33 (0)1 34 90 90 00

