Français
EspañolDosing & moulding MPT6 mould filling machine
Turn your tempering machine into a depositing and moulding machine: the MPT6 doses, fills and vibrates your moulds, bars as well as small moulded pieces, with a single operator. Made in France.
- 6moulds filled per minute
- 1operator
- 400 mmconveyor width
Or call us: +33 (0)1 34 90 90 00
Automatic dosing
MPT6 mould filling machine
The MPT6 mould filling machine turns your tempering machine into a real depositing and moulding machine. It fits the GOLD 4 and the CRYSTAL machines. Specially designed for filling thermoformed and polycarbonate moulds, it lets a single person fill by dosing and vibrate 6 moulds per minute. Made in France.
- 6moulds/min
- 500W
- 230V single-phase
- Moulds275 × 135 mm · 275 × 175 mm
- ConveyorWidth 400 mm · 1,500 to 2,500 mm
- Power supply230 V single-phase · 500 W
- Compressed air6 bar · 20 L/min
Its strengths
Equipment
Watch the video
Request a quote
PDF brochure
Going further
With or without mould loader
The MPT6 fits the GOLD 4 tempering machine and the CRYSTAL 185, 285 and 305 enrobers.
MPT6 mould filling machine
Twin-belt conveyor, pneumatic dosing head and outfeed vibrating table: you place the moulds, the machine doses and vibrates.
Standard · 2 depositing plates supplied
Mould destacking loader
It destacks polycarbonate moulds and pushes them one by one onto the conveyor, with a pneumatic cylinder. Capacity: 20 moulds.
Optional · for polycarbonate moulds
What you mould
Bars, small moulded pieces and mouldings
The MPT6 takes all thermoformed and polycarbonate moulds of 135 × 275 mm and 175 × 275 mm, up to 25 mm high.
Polycarbonate and thermoformed moulds
Small moulded pieces, figures and seasonal mouldings, filled with the right dose.
Clean, accurate dosing
The tempered chocolate is deposited in the right dose, through a depositing plate for bars or for small moulded pieces.
On your machine
The dosing head is mounted on your GOLD 4 or your CRYSTAL.
MPT6
How does a mould filling machine work?
The mould moves under the dosing head, receives the right amount of tempered chocolate, then is vibrated at the outfeed.
2 laser sensors
1. The mould moves forward
Placed on the twin-belt conveyor, the mould is detected by two laser sensors.
3-way valve
2. Dosing
The pneumatic head doses the tempered chocolate. It circulates constantly in the valve: it does not stagnate and the tempering stays stable.
6 moulds/min
3. Vibrating
The filled mould passes over the outfeed vibrating table, which spreads the chocolate and removes air bubbles.
Technical data
Specifications of the MPT6 mould filling machine
| MPT6 | |
|---|---|
| Output | 6 moulds per minute |
| Mould dimensions | 275 × 135 mm · 275 × 175 mm |
| Maximum mould height | 25 mm |
| Conveyor width | 400 mm |
| Conveyor length | 1,500 to 2,500 mm |
| Frame | Stainless steel |
| Voltage | 230 V single-phase |
| Power | 500 W |
| Compressed air | 6 bar · 20 L/min (compressor not supplied) |
| Compatible machines | GOLD 4 · CRYSTAL 185, 285 and 305 |
| Made in | France |
| Option | Mould destacking loader, 20 moulds |
Frequently asked questions
MPT6 mould filling machine: your questions
What is a mould filling machine used for?
A mould filling machine turns a tempering machine into a depositing and moulding machine. The moulds move along a conveyor, pass under a dosing head that fills them with tempered chocolate, then over a vibrating table. A single person is enough to fill and vibrate 6 moulds per minute.
Which machines does the MPT6 fit?
The GOLD 4 tempering machine and the CRYSTAL 185, 285 and 305 enrobers.
Which moulds can be used?
All thermoformed and polycarbonate moulds of 135 × 275 mm and 175 × 275 mm, with a maximum height of 25 mm. The dosing head comes with one depositing plate for bars and one for small moulded pieces.
Why is the dosing accurate?
Dosing is done by a pneumatic 3-way valve. The chocolate does not stagnate: it stays in constant circulation in the valve, which keeps the tempering perfectly stable. On CRYSTAL models, the dosed quantity is set on the touchscreen.
Do you need a compressor?
Yes. The MPT6 runs on compressed air, at 6 bar and 20 L/min. The compressor is not supplied. For electricity, a 230 V single-phase socket is enough (500 W).
Where is the MPT6 made?
The MPT6 is made in France by Savy Hacos, a manufacturer of chocolate equipment for over 50 years.
Can mould feeding be automated?
Yes, with the optional mould destacking loader. It pushes polycarbonate moulds one by one onto the conveyor, with a pneumatic cylinder, and holds up to 20 moulds.
Quick quote
Request your quote in 1 minute
Leave us your details: a Savy Hacos expert will get back to you to clarify your needs and send you an offer suited to your production.
- A quick reply to your request
- Machines with a 2-year warranty
- Delivery and installation included in mainland France
Prefer to call? +33 (0)1 34 90 90 00
A project? Let’s talk about your production.
Moulds, output, machine to equip: our experts check with you that the MPT6 is compatible with your set-up.
Or call us: +33 (0)1 34 90 90 00
